Two phase immersion cooling solution for efficient cryptocurrency mining

دع CoolTank يجعلها بسيطة!
 Join the Telegram channel for latest updates: https://t.me/theCoolTank

غمر  خزان التبريد

يمكنك شراء خزانات التبريد الغاطسة أحادية الطور (CoolTank) المُحسَّنة للعمل بفعالية في مناخ الشرق الأوسط. هذا هو حل "التوصيل والألغام". يعتبر الخزان لبنة أساسية لجميع حلول الغمر التي يمكن تحجيمها إلى رف كامل أو نظام متعدد الأرفف. يتوفر أيضًا اقتراح استثمار خزان الغمر على مرحلتين.  اقرأ أكثر…

CoolTank 2.0 - 2-phase immersion cooling mining tank
  • 90٪ توفير في الطاقة عند التبريد
  • زيادة أرباح التعدين بنسبة 40٪
  • الحفاظ على الحالة الجديدة لعامل منجم ASIC
  • 1880 Th hashing power
  • 75 kW - maximum cooling capacity

How it works

Hashing chips are directly immersed in dielectric liquid in a sealed, but easily accessible tank where heat from chips causes the fluid to boil, producing vapor that rises from the liquid.

Fluid is boiled and condensed, exponentially increasing heat transfer efficiency

The vapor condenses on a heat exchanger (condenser) within the tank, transferring heat to facility water that flows outside of the crypto mining farm

2-phase immersion cooling scheme.png

Use case

Antminer S19 Pro

Antminer's latest models have a big removable heatsink screwed to the front side of each hashing board; however, heatsinks on the backside are welded and are not removable. Hashing boards without a front heatsink are very compact, and up to 12 miners Anitminer S19 (110TH, 3250W) can be installed by a client.

Antminer S19.png

x 12

x 36

CoolTank_2_edited.png

1850 TH

54 kW

WhatsMiner S30_hashing board (front).png
WhatsMiner S30_hashing board (front).png
WhatsMiner S30_hashing board (front).png

Overclock

40%

Overclocking by 40%, or 528 Th provides hashing power of 4.8 additional free units of Antminer S19 Pro (110Th, 3250W) worth $8350x4.8=$40,080

Client additionally may purchase "Installation and startup service"

WhatsMiner M30S+

WhatsMiner's latest models luckily have a big removable heatsink screwed to the front side of each hashing board only. There are no heatsinks on the backside. The width of hashing board with chips and capacitors is 5 mm only. Therefore a client can install up to 14 miners WhatsMiner M30S+ (100TH, 3400W). 

 

Physically you can fit more, but an upgrade will be required to add: power busbars, signal cables, ethernet switches, new frame to hold hashing boards. So let's keep it for the following models of CoolTank.

WhatsMiner S30++.png
WhatsMiner S30_hashing board (wo hs).png
WhatsMiner S30_hashing board (wo hs).png
WhatsMiner S30_hashing board (wo hs).png

Overclock

x 14

x 42

CoolTank_2_edited.png

1960 Th

66 kW

40%

Overclocking provides hashing power of 5.6 additional free units of WhatsMiner M30S+ (100 Th, 3400W) worth $8350x5.6=$46,760.

It's worth mentioning that miners used in 2-phase immersion cooling liquid remain clean and work in a safe environment without overheating. 

The designed cooling capacity of the CoolTank is 75 kW. This capacity is more than enough for currently accessible miners. In the future, miners will provide more hashing power (Th) and consume less electricity, but your CoolTank will be ready to work and provide extra profit due to overclocking. For example, imagine what you can do with Antminer S19 XP Hydro (255 Th).